|CHARACTERISTICS||No lubricating oil needed due to self-lubricity of PEEK & fluorine resin.
Excellent corrosion resistant resin bearing
|TEMPERATURE||Heat characteristics of ETFE Thermoplastic fluoroplastic
・Heat distortion temperature 0.45MPa loading at 92 degree c.
・Melting point 263 degree c.
・Standard continuous use: temperature from 90 to 150 degree c. (Subject to conditions）
|STANDARD OF USE||・In atmosphere 300 RPM Radial load 9.8N 1 million revolutions
・In atmosphere 3000 RPM（Inner ring revolutions）Radial load 0.15 N 1 million revolutions
|CHEMICAL PROPERTIES||Chemical resistance of stainless ball (SUS304)|
・Weak against sulfuric acid, hydrochloric acid, hydrofluoric acid, oxalic acid.
For details, please contact us.
|PRE-LOAD||・Please use without applying preload as much as possible.|
|SPECIFICATIONS||［Material］ Inner/Outer ring: PEEK Balls: SUS304 Retainer: fluoroplastics|
［Balls］ 0.8 mm
|USAGE||・Under water, solution
・Bearing used in clean room
|Specifications in this catalogue is subject to change without prior notice.|
|Please do not hesitate to make any request to our Venture Buisiness Division for calalogue, inquiry, quotation and order of our products.|