|CHARACTERISTICS||No lubricating oil needed due to self-lubricity of PEEK & fluorine resin.
Excellent corrosion resistant resin bearing
|TEMPERATURE||Heat characteristics of ETFE Thermoplastic fluoroplastic
・Heat distortion temperature 0.45MPa loading at 92 degree c.
・Melting point 263 degree c.
・Standard continuous use: temperature from 90 to 150 degree c. (Subject to conditions）
|LOAD||・Allowable radial load 68.6N (7kg)|
|REVOLUTIONS||・In atmosphere within 300 RPM
・Under water a thousand RPM (subject to condition)
|CHEMICAL PROPERTIES||Chemical resistance of ceramic ball|
・Resistant to most chemicals but weak against hydrochloric acid, hydrofluoric acid, and strong alkali.
For details, please contact us.
|PRE-LOAD||・Please use without applying preload as much as possible.|
|SPECIFICATIONS||［Material］ Inner/Outer ring: PEEK Balls: Ceramic Retainer: PEEK|
|USAGE||・Under water, solution
・Bearing used in clean room
|Specifications in this catalogue is subject to change without prior notice.|
|Please do not hesitate to make any request to our Venture Buisiness Division for calalogue, inquiry, quotation and order of our products.|