TOP„TECHNICAL INFORMATION„BUILT-IN PLASTIC BEARING

TECHNICAL INFORMATION


BUILT-IN PLASTIC BEARING
@
Recommended dimension for@plastic bearing built-in


Depending on usage conditions, please change dimensions appropriately.
The material of inner and outer rings of plastic bearings (POM/ PEEK) is not recommended because it is weak in adhesion with adhesive.

Bearing inner diameter Shaft diameter
(lightly pressedj
Axial tolerance
JIS B 0401
Target plastic bearing part number
1.5 @ 0
|0.02
1.5 {0.006
@ 0
k6 B5015
2.0 @ 0
|0.02
2.0 {0.006
@ 0
k6 B6020/B6020U
2.5 @ 0
|0.02
2.5 {0.006
@ 0
k6 B6525
3.0 @ 0
|0.02
3.0 {0.006
@ 0
k6 B8030/B8030U
4.0 @ 0
|0.02
4.0 {0.009
{0.001
k6 B9040/B9040U
5.0 @ 0
|0.02
5.0 {0.009
{0.001
k6 B13050/B13050ZZ
6.0 {0.02
@ 0
¦6.0 {0.003
|0.003
js5 B10060
8.0 @ 0
|0.02
8.0 {0.010
{0.001
k6 B22080/B22080F/B22080ZZ
B22080FZZ/C22080-PEEK
10.0 @ 0
|0.02
10.0 {0.010
{0.001
k6 B220100/B260100/C190100-PEEK/C220100-PEEK
C260100-PEEK/C300100-PEEK
10.0 {0.015
@ 0
¦10.0 {0.015
{0.006
m6 B220100FZZAP(Small radial clearance)
12.0 @ 0
|0.02
12.0 {0.012
{0.001
k6 C320120-PEEK
15.0 @ 0
|0.02
15.0 {0.012
{0.001
k6 C280150-PEEK
¦Shaft diameter is an intermediate fit.


Bearing outer diameter Housing diameter
(intermediate fitj
Bore tolerance
JIS B 0401
Target plastic bearing part number
5.0 }0.01 5.0 }0.006 JS7 B5015
6.0 }0.01 6.0 }0.006 JS7 B6020
6.5 }0.01 6.5 }0.0045 JS6 B6525
8.0 }0.01 8.0 }0.0045 JS6 B8030
9.0 }0.01 9.0 }0.0045 JS6 B9040
10.0 }0.01 10.0 }0.0045 JS6 B10060
13.0 }0.01 13.0 }0.0055 JS6 B13050/B13050ZZ
19.0 }0.01 19.0 }0.0045 JS5 C190100-PEEK
22.0 }0.01 22.0 }0.0045 JS5 B220100/B22080/B22080F/B22080ZZ
B22080FZZ/C22080-PEEK/C220100-PEEK
22.0 |0.007
|0.02
22.0 |0.005
|0.014
M5 B220100FZZAP(Small radial clearance)
26.0 }0.01 26.0 }0.0045 JS5 B260100/C260100-PEEK
28.0 }0.01 28.0 }0.0045 JS5 C280150-PEEK
30.0 }0.01 30.0 }0.0045 JS5 C300100-PEEK
32.0 }0.01 32.0 }0.0055 JS5 C320120-PEEK